MONSHER MD 4502 - Инструкция по эксплуатации - Страница 73

Русский

73

English

Problem

Possible causes

Solution

There are rust stains 

on cutlery

The affected items are not 

corrosion resistant.

Avoid washing items that are not corrosion resistant 

in the dishwasher.

A program  

was not run after dishwasher 

salt was added. Traces of salt 

have gotten into the wash cycle.

Always run the quick wash program. without any 

crockery in the dishwasher and without selecting 

the Turbo function (if present), after adding 

dishwasher salt.

The lid of the softer is loose.

Check the lip. Ensure the fix is fine.

Knocking noise in

the dishwasher

A spray arm is knocking

against an item in a

basket

Interrupt the program and rearrange the items 

which are obstructing the spray arm.

Rattling noise in

the dishwasher

Items of crockery are loose in 

the dishwasher.

Interrupt the program and rearrange the items of 

crockery

Knocking noise in the 

water pipes

This may be caused by on-site 

installation or the cross-section 

of the piping.

This has no influence on the dishwasher function. If 

in doubt, contact a qualified plumber.

The dishes are not 

clean

The dishes were not loaded 

correctly.

See PART II: «Preparing And Loading Dishes».

The programme was not 

powerful enough.

Select a more intensive programme.

Not enough detergent was 

dispensed.

Use more detergent, or change your detergent.

Items are blocking the 

movement of the spray arms.

Rearrange the items so that the spray can rotate 

freely.

The filter combination is not 

clean or is not correctly fitted in 

the base of wash cabinet.

This may cause the spray arm 

jets to get blocked.

Clean and/or fit the filter correctly.

Clean the spray arm jets.