MONSHER MD 4502 - Инструкция по эксплуатации - Страница 56

Русский

56

English

Please follow the steps below for adding dishwasher salt: 

1.  Remove the lower basket and unscrew the reservoir cap.
2.  Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of 

dishwasher salt.

3.  Fill the salt container to its maximum limit with water, It is normal for a small 

amount of water to come out of the salt container.

4.  After filling the container, screw back the cap tightly.
5.  The salt warning light will stop being after the salt container has been filled 

with salt.

6.  Immediately after filling the salt into the salt container, a washing program 

should be started (We suggest to use a short  program). Otherwise the filter 
system, pump or other important parts of the machine may be damaged by salty 
water. This is out of warranty.

NOTE:

;

The salt container must only be refilled when the salt warning light 

( 

 ) in the control panel comes on. Depending on how well the salt dissolves, 

the salt warning light may still be on even though the salt container is filled.  
If there is no salt warning light in the control panel (for some Models), you can 
estimate when to fill the salt into the softener by the cycles that the dishwasher 
has run.

;

If salt has spilled, run a soak or quick program to remove it.