MONSHER MD 4502 - Инструкция по эксплуатации - Страница 63

Русский

63

English

INSTALLATION INSTRUCTION

WARNING

Electrical Shock Hazard 

Disconnect electrical power before installing dishwasher. 

Failure to do so could result in death or electrical shock.

ATTENTION

The installation of the pipes and electrical equipments should 

be done by professionals.

About Power Connection

WARNING

For personal safety:

;

Do not use an extension cord or an adapter plug with this appliance.

;

Do not, under any circumstances, cut or remove the earthing connection from 

the power cord.

Electrical requirements

Please look at the rating label to know the rating voltage and connect the 

dishwasher to the appropriate power supply. Use the required fuse 10A/13A/16A, 

time delay fuse or circuit breaker recommended and provide separate circuit 

serving only this appliance.

Electrical connection

Ensure the voltage and frequency of the power being  corresponds to those 

on the rating plate. Only insert the plug into an electrical socket which is earthed 

properly. If the electrical socket to which the appliance must be connected is not 

appropriate for the plug, replace the socket, rather than using a adaptors or the 

like as they could cause overheating and burns.

Ensure that proper earthing exists before use

Remove the plug

Before cleaning or performing maintenance, always remove the plug from the 

socket.