MONSHER MD 4502 - Инструкция по эксплуатации - Страница 65

Русский

65

English

Connection Of Drain Hoses

Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let 

it run into the sink, making sure to avoid bending or crimping it. The height of drain 

pipe must be less than 1000mm. The free end of the hose must not be immersed 

in water to avoid the back flow of it.

Please securely fix the drain hose in either position A or position B.

How to drain excess water from hoses

If the sink is 1000 higher from the floor, the excess water in hoses cannot be 

drained directly into the sink. It will be necessary to drain excess water from hoses 

into a bowl or suitable container that is held outside and lower than the sink. 

Water outlet

Connect the water drain hose. The drain hose must be correctly fitted to avoid 

water leaks. Ensure that the water drain hose is not kinked or squashed.

Extension hose

If you need a drain hose extension, make sure to use a similar drain hose.    

It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher 

could be reduced.

Syphon connection  

The waste connection must be at a height less than 100 cm (maximum) from the 

bottom of the dish. The water drain hose should be fixed . 

Back of dishwasher

Counter

MA

X 1000mm

Drain hose

Mains Cable

Water Inlet
Drain Pipe