MONSHER MD 4502 - Инструкция по эксплуатации - Страница 87

Русский

87

English

Filling The Rinse Aid Reservoir

To open the dispenser, turn the 

cap to the  «open» (left) arrow 

and lift it out.

Carefully pour in the rinse-aid 

into its dispenser, whilst avoiding 

it to overflow.

Replace the cap by  inserting it 

aligned with  «open» arrow and 

turning it to the closed (right) arrow.

 NOTE:

Clean up any spilled rinse aid 

with an absorbent cloth to avoid 

excessive foaming during the next 

wash. 

Adjusting the rinse aid reservoir

The rinse aid reservoir has six settings. 

Both the recommended setting and the 

factory setting is «4». If the dishes are not 

drying properly or are spotted, adjust the dial 

to the next higher number until your dishes 

are spot-free.

Reduce it if there are sticky whitish stains 

on your dishes or a bluish film on glassware 

or knife blades.

Rinse-Aid indicator

 Adjust lever(Rinse)