Kuppersberg GLF 689 - Инструкция по эксплуатации - Страница 33

33

english

Technical passporT

Dishwasher

Upper impeller

Check if the holes on the upper 

impeller are clogged. If they are clogged, 
remove and clean the impeller. Turn its 
nut to left to remove the upper impeller.
Make sure that the nut is tightened well 
when installing the upper impeller.

Ceiling impeller

Check if the holes on the top ceiling 

impeller of your machine are clogged. If 

they are clogged, remove and clean.

To remove the impeller, slightly push 

it upwards and then turn clockwise.

To install the impeller, seat it into its 

slot, push slightly upwards and turn it 

anticlockwise  until  it  is  securely  fi tted. 

When the impeller is released, check if it 
rotates without any obstruction.

7.  T RO U B L E S H O OT I N G

Machine does not start.

Â

 Power cable is unplugged. >>> 

Check if the power cable is plugged in.

Â

 Fuse is blown. >>> Check the 

fuses in your house.

Â

 Water is cut. >>> Make sure that 

the water inlet tap is open.

Â

 Door of the machine is open. 

>>> Make sure that you have closed the 
door of the machine.

Â

 On / Off button is not pressed. 

>>> Make sure that you have turned on 
the machine by pressing the On / Off 
button.

Dishes are not washed clean

Â

 Dishes are not placed orderly 

in the machine. >>> Load the dishes as 
described in the user manual.