Kuppersberg GLF 689 - Инструкция по эксплуатации - Страница 14

14

Technical passporT

english

Dishwasher

3.  Close the detergent dispenser lid 

by pressing on it lightly. A «click» 
will be heard when the lid is 
closed.

In programmes with prewash and 

at high temperature, in which you use 
tablet detergents, make sure that the 

detergent dispenser lid is closed fi rmly.

Use powder detergent in short 

programmes without prewash since 
the solubility of the tablet detergent 
changes depending on the temperature 
and time.

Excessive usage of powder 

detergents will cause the detergent not 
dissolve completely and will also cause 
scratches on the glassware.

Tablet detergents

Table detergents exhibit water 

softening and / or rinse aid effect in 
addition to detergent effect. Some types 
of these detergents also contain special-
purpose washing chemicals such as 
glass and stainless steel protectors.

Tablet detergents give satisfying 

results only under certain usage 
conditions. The best washing 
performance in dishwashers is obtained 

by using detergent, rinse aid and water 
softening salt individually.

Information about suitable places 

(detergent dispenser, basket etc.) in the 
dishwasher to place the tablet can be 
found amongst the usage instructions 
on the packages of the tablet detergents.

Tablet detergent types commonly 

found in the market:

2 in 1: 

Contains detergent, 

rinse aid or water softening salt

3 in 1:

Contains detergent, 

rinse aid and water softening salt

4 in 1:

 Contains  glass 

protectors in addition to detergent, 
rinse aid and water softening salt

5 in 1: 

Contains glass and 

stainless steel protectors in addition to 
detergent, rinse aid and water softening 
salt

Observe the instructions of the 

detergent manufacturer on the package 
when using tablet detergents.

When you switch to powder 

detergent from tablet 

detergent:

1.  Make sure that salt and rinse aid 

reservoirs are full.

2.  Set the water hardness to the 

highest level and perform an 
empty run.

3.  After the empty washing cycle, 

review the user manual and 
readjust the water hardness level 
so as to suit the water supply.

4.  Make the appropriate rinse aid 

settings.