MG ZBM 6699 ANT - Инструкция по эксплуатации - Страница 63

GB

63

If the connecting tube must be passed behind the appliance, 
observe the regulations of the picture 11C.  

ELECTRICAL CONNECTION

CONNECTION TO THE MAINS SUPPLY THE APPLIANCE 
MUST BE CONNECTED IN ACCORDANCE WITH THE RULES 
IN FORCE, AND ONLY BY AN AUTHORIZED ELECTRICAL 
INSTALLER. 

WARNING: THIS APPLIANCE MUST BE EARTHED 

Check that the power rating of the mains supply and of the 
sockets are suitable for the maximum power of the appliance 
as indicated on the specification plate. If the appliance does 
not come already fitted with a plug, fit a regulation plug to the 
cable which is capable of taking the power indicated on the 
specification plate (fig. 8 B

*

). 

The earth wire is yellow/green. 

If the plug fitted to the 

appliance, and the socket, are incompatible, get a profesionnally 
qualified person to fit the correct type of plug. If an appliance 
is not equipped with supply cable and plug, the power supply 
must be fitted with a disconnect switch in which the distance 
between contacts permits total disconnection in accordance with 
overvoltage category III, as required by installation regulations. 

The yellow/green earth wire should not be controlled by 
the switch. 

The plug used for mains supply connection should 

be easy to get at, once the appliance is in position. 

Important:

 position the mains supply cable so that it is never 

subjected to a temperature which is more than 50°C above 

Stop

Inlet

Fig. 11C

Fig. 11C