MG ZBM 6699 ANT - Инструкция по эксплуатации - Страница 52

52

GB

The symbols light up when the corresponding functions are 
selected. 

Setting

To set, press and release the desired function, and within 
5  seconds set the time with + and —  buttons. 

+ and —  buttons. 

The + and —  buttons increase or decrease the time at a speed 
depending on how long the button is pressed. 

Setting the time 

Press any two buttons manual at the same time, and + or —  
button to set the desired time. This deletes any previously set 
programme. The contacts are switched off and the AUTO symbol 
flashes. 

Manual use 

By pressing the manual button the relay contacts switch on, 
the AUTO symbol switches off and the saucepan symbol lights 
up. Manual operation can only be enabled after the automatic 
programme is over or it has been cancelled. 

Automatic use

Press the cooking time or end time button to switch automatically 
from the manual to the automatic function. 

Semi-automatic use with cooking time setting 

Press the cooking time button and set the desired time with  
+ or -. The AUTO and cooking time symbols light up continuously. 
The relay switches on immediately. When the cooking end time 
corresponds to the time of day, the relay and cooking time 
symbol switch off, the sound signal rings and the AUTO symbol 
flashes. 

Semi-automatic use with end time setting 

Press the end time button. The time of day appears on the 
display. Set the cooking end time with + button. The AUTO and 
cooking time symbols light up continuously. The relay contacts 
switch on. When the cooking end time corresponds to the time 
of day, the relay and the cooking time symbol switch off. When 
the cooking time is up, the AUTO symbol flashes, the sound 
signal rings and both the relay and the cooking time button 
switch off. 

Minute timer

Cooking time

Cooking end

Manual

Subtract time

Add time

Fig. 4