MG ZBM 6699 ANT - Инструкция по эксплуатации - Страница 57

GB

57

CARE AND MAINTENANCE

Before cleaning the appliance, disconnect the gas general 
tap and unplug the appliance or disconnect power at the 
main circuit breaker of the electrical system. 
Do not clean the appliance surfaces when still hot. 
Do not use steam cleaners to clean the oven. 

IMPORTANT 

Periodically check the external gas connection hole 
and replace it when it shows any sign of deterioration.  
Do not attempt to repair the gas hose under any 
cincumstances. 

ENAMELLED SURFACES 

Clean with a damp sponge using soap and water. 
Grease can be easily removed using hot water or a specific 
cleansing agent for enamelled surfaces. Do not use abrasive 
cleansers. 
Do not leave any acid or alkaline substances (lemon juice, 
vinegar, salt, etc.) on the enamel.
Clean the parts in stainless steel with specific cleansers for stainless 
steel surfaces. 
These detergents must be applied using a soft cloth. 

GRIDS AND BURNERS 

To clean the work-top burners, remove them by pulling upwards 
and soak them for about 10 minutes in hot water with a little 
detergent. After having cleaned and washed them, wipe them 
carefully. 

Make sure that no burner hole is clogged. 

Clean the burners once a week or more frequently if necessary. 

MAKE SURE YOU HAVE ASSEMBLED  

THE BURNERS IN A RIGHT WAY. 

The interior glass of the oven  
(Only for models where present) 

The interior glass of the oven door can be removed: with the door 
in a semi-open position, use both hands to remove the glass as 
shown in figures 7A. 
After cleaning, refit the glass by proceeding in reverse order. 

Fig. 7А

Fig. 7A