MG ZBM 6699 ANT - Инструкция по эксплуатации - Страница 62

62

GB

WARNING: connect the gas to the oven’s gas supply line 
using the supplied connector (A) (see figure 11) 

3)  by the insertion of a rubber tube in accordance with rules.  

This tube must be connected directly on the push-on 
connector, concerning the gas used, and it must be blocked 
with a band. In the last case, check the tube’s printed date of 
expiry and replace it before this date (see fig. 11B). 

Once the gas appliance has been connected, check the 
connection seal by means of soapy water. 

WARNING
Do not use flames to check any gas leakages.  

WARNINGS 

Concerning rubber flexible tubes, we remember you: 
1) to avoid the tube to be narrowed or crushed 
2) do not submit it to traction or torsion efforts 
3) to avoid contact with sharp edges, etc... 
4)  to avoid contact with parts reaching temperatures over 70°C 

the ambient temperature 

5) to ensure that they can be checked for all their length. 

Certain types of cookers can be set for sypply both on the right 
or lefthand side. In this case it is sufficient to reverse the position 
of the cad nipple reducer. At the end make sure than there is no 
leakage of gas (fig 11C). 

HOSE 

ATTACHMENT 

FOR LIQUID 

GAS

HOSE 

ATTACHMENT 

FOR NATURAL 

GAS

Fig. 11B

Fig. 11