Marta MT-4309 - Инструкция по эксплуатации - Страница 37

Мультиварки Marta MT-4309 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 85
Загружаем инструкцию
background image

 

37 

 

When cooking is over please unplug the appliance. You must cut pressure inside the multicooker down. Open the steam relief valve. Hot steam goes out and pressure inside becomes lower (pic 7). 

               

 
CAUTION: Be really careful – steam is extremely hot! When pressure inside the multicooker becomes lower, then there is no outgoing steam from steam release opening, and float valve goes 

down to the lowest position. Then open the lid. Never open the lid by force. 
 

Please find recommended by our chef recipes for cooking with different automatic programs in our recipe book. 

 
Cooking suggestions and requirements: 

Weight of product you see in our recipe book is weight of clean, peeled, defrosted and chopped product. If you want to change our recipe please follow products 

proportions, otherwise a dish could be burnt or it could boil away. Please mind to check and correct time or change cooking program in that case. Some other objective reasons could affect cooking time. They 
are region where you live, product’s place of origin, storage time and temperature of product. Please mind that written cooking time is recommended and may vary. The recipe book is just our recommendation 
and advice. 

 

CHEF PRO – TEMPERATURE AND TIME ADJUSTMENT, MANUAL SET UP AND SAVE FOR FURTHER USE (IN «МУЛЬТИПОВАР/MULTICOOK», «ШЕФ/CHEF» 
PROGRAMS AND IN REQUIRED AUTOMATIC PROGRAM)  

 
COOKING WITHOUT PRESSURE (MULTICOOKER MODE) 

You could change time and temperature settings before cooking process start and while cooking program is running (in cooking programs without pressure). They are «

Жарка/Fry», «Выпечка/Cake», 

«Томление/Slow stew», «Варенье/Джем/Jam», «Йогурт/Тесто/Yoghurt/Dough»

. You could set up your cooking time and temperature settings in 

«Мультиповар/Multicook»

 program as well. 

 

Change default settings before cooking program start (without pressure) 

 

Choose cooking program with button 

. If you need 

«Мультиповар/Multicook»

 choose it the same way. 

 

The display shows preset time (for 

«Мультиповар/Multicook» 

it is 10 minutes). 

 

Press button of time and temperature settings 

. Then you see flashing time adjustment indication 

 and flashing hour meaning on the display 

. You could set up hours with buttons 

 (up) and 

 (down). Hour range is from 0 to 24 hours. Interval is 1 hour. If you keep button 

 or 

 pressed, then hours scroll faster. 

 

For minutes set up press button 

 shortly again and you see flashing time adjustment indication 

 and flashing minute meaning on the display 

. You could set up minutes with buttons 

 (up) and 

 (down). Minute range is from 0 to 59 minutes. Interval is 1 minute. If you keep button 

 or 

 pressed, then minutes scroll faster. 

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Marta MT-4309?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"