Материнские платы GIGABYTE G1 Guerrilla rev 1 0 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

Appendix
- 112 -
•
Rebuilding in the operating system
Make sure the JMicron JMB362 SATA controller driver has been installed from the motherboard driver disk.
Launch the GIGABYTE RAID CONFIGURER from
All Programs
in the
Start
menu.
Step 1:
In the GIGABYTE RAID CONFIGURER screen,
right-click on the array to be rebuilt in the
RAID
LIST
block. Select
Rebuild Raid
. (Or click the
Rebuild
icon in the tool bar.)
Step 3:
Select a drive to rebuild the array and click
Next
.
Step 2:
When the Rebuilding RAID Wizard appears,
click
Next
.
Step 4:
Click
Finish
to start the RAID rebuilding process.
Step 6:
When finished, restart your system.
Step 5:
The rebuilding progress is displayed at the
bottom of the screen.