Sony CDX-G3200UV - Инструкция по эксплуатации - Страница 21

21

GB

Cautions

•

Run all ground (earth) leads to a 
common ground (earth) point.

• Do not get the leads trapped under a 

screw, or caught in moving parts (e.g., seat 
railing).

• Before making connections, turn the car 

ignition off to avoid short circuits.

• Connect the power supply lead 



 to the 

unit and speakers before connecting it to 
the auxiliary power connector.

• Be sure to insulate any loose unconnected 

leads with electrical tape for safety.

• Choose the installation location carefully so 

that the unit will not interfere with normal 
driving operations.

• Avoid installing the unit in areas subject to 

dust, dirt, excessive vibration, or high 
temperature, such as in direct sunlight or 
near heater ducts.

• Use only the supplied mounting hardware 

for a safe and secure installation.

Note on the power supply lead (yellow)

When connecting this unit in combination with 
other stereo components, the amperage rating of 
the car circuit to which the unit is connected must 
be higher than the sum of each component’s fuse 
amperage rating.

Mounting angle adjustment

Adjust the mounting angle to less than 45°.

Parts List for Installation

• This parts list does not include all the 

package contents.

• The  bracket 



 and the protection collar 



are attached to the unit before shipping. 
Before mounting the unit, use the release 
keys 



 to remove the bracket 



 from the 

unit. For details, see “Removing the 
protection collar and the bracket” 
(page 24).

• Keep the release keys 



 for future use as 

they are also necessary if you remove the 
unit from your car.

Connection/Installation

Precautions









× 2



