Ryobi+ RY18HT45A-0 - Инструкция по эксплуатации - Страница 5

■

If the product is dropped, suffers heavy impact, or begins 
to vibrate abnormally, immediately turn off the product 
and inspect it for damage or identify the cause of the 
vibration. Any damage should be properly repaired or 
replaced by an authorised service centre.

■

Operate the product only in temperatures between 0°C 
and 40°C.

■

Store the product in a location where the ambient 
temperature is between 0°C and 40°C.

■

Injuries may be caused, or aggravated, by prolonged 
use of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

ADDITIONAL BATTERY SAFETY WARNINGS

■

To reduce the risk of fire, personal injury, and product 
damage due to a short circuit, never immerse the tool, 
battery pack, or charger in fluid or allow fluid to flow 
inside them. Corrosive or conductive fluids, such as 
seawater, certain industrial chemicals, and bleach or 
bleach-containing products, etc., can cause a short 
circuit.

■

Charge the battery pack in a location where the ambient 
temperature is between 10°C and 38°C.

■

Store the battery pack in a location where the ambient 
temperature is between 0°C and 40°C.

■

Use the battery pack in a location where the ambient 
temperature is between 0°C and 40°C.

TRANSPORTATION AND  STORAGE

■

Turn off the product, remove the battery pack, and allow 
both to cool down before storing or transporting.

■

Remove all foreign materials from the product. Store the 
product in a cool, dry, and well-ventilated area that is 
inaccessible to children. For extra safety, store the battery 
pack separately from the product. Keep the product away 
from corrosive agents such as garden chemicals and de-
icing salts. Do not store the product outdoors.

■

Fit the blade cover before storing the product or during 
transportation.

■

For transportation, secure the product against movement 
or falling to prevent injury to persons or damage to the 
product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.
Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps or 
tape. Do not transport batteries that are cracked or leaking. 
Check with the forwarding company for further advice.

MAINTENANCE

■

Use only original manufacturer’s replacement parts, 
accessories, and attachments. Failure to do so can cause 
possible injury, can contribute to poor performance, and 
may void your warranty.

■

Servicing requires extreme care and knowledge 
and should be performed only by a qualified service 
technician. Have the product serviced by an authorised 
service centre only.

■

The blades are extremely sharp. To prevent personal 
injury, exercise extreme caution when cleaning, 
lubricating, fitting, or removing the blade protector.

■

Remove the battery pack before adjusting, maintaining, 
or cleaning the product.

■

You may make adjustments and repairs described in this 
manual. For other repairs, have the product serviced by 
an authorised service centre only.

■

After each use, clean the plastic parts with a soft, dry cloth.

■

After each use, clean the debris from the blades with a 
stiff brush, and then carefully apply a rust preventative 
lubricant before refitting the blade protector. The 
manufacturer recommends using rust preventative 
lubricant spray to apply an even distribution and reduce 
the risk of personal injury from contact with the blades. 
For information about a suitable spray product, check 
with an authorised service centre.

■

Check all nuts, bolts, and screws at frequent intervals 
for proper tightness to ensure that the product is in safe 
working condition. Any part that is damaged should be 
properly repaired or replaced by an authorised service 
centre.

KNOW YOUR PRODUCT

See page 106.

1. Blade guard
2. Front trigger
3. Front handle
4. Rear handle
5. Trigger
6. Blade
7.  HEDGESWEEP debris sweeper
8. Blade cover
9. Operator's manual
10. Battery pack
11. Charger

SYMBOLS ON THE PRODUCT

Safety alert

Read and understand all instructions 
before operating the product. Follow 
all warnings and safety instructions.

European Conformity Mark

British Conformity Mark

EurAsian Conformity Mark

Ukraine Conformity Mark

Waste electrical products should not 
be disposed of with household waste. 
Please recycle where facilities exist. 
Check with your local authority or 
retailer for recycling advice.

ENGLISH

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

5

Original Instructions