Ryobi+ RY18HT45A-0 - Инструкция по эксплуатации - Страница 4

■

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to 
be performed. 

Use of the power tool for operations 

different from those intended could result in a hazardous 
situation.

■

Keep handles and grasping surfaces dry, clean 
and free from oil and grease. 

Slippery handles and 

grasping surfaces do not allow for safe handling and 
control of the tool in unexpected situations.

BATTERY TOOL CARE AND USE

■

Recharge only with the charger specified by the 
manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

■

Use power tools only with specifically designated 
battery packs. 

Use of any other battery packs may 

create a risk of injury and fire.

■

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns 
or a fire.

■

Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally 
occurs, flush with water. If liquid contacts eyes, 
additionally seek medical help. 

Liquid ejected from 

the battery may cause irritation or burns.

■

Do not use a battery pack or tool that is damaged or 
modified. 

Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or 
risk of injury.

■

Do not expose a battery pack or tool to fire or 
excessive temperature. 

Exposure to fire or temperature 

above 130°C may cause explosion.

■

Follow all charging instructions and do not charge 
the battery pack or tool outside the temperature 
range specified in the instructions. 

Charging 

improperly or at temperatures outside the specified 
range may damage the battery and increase the risk of 
fire.

SERVICE

■

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 

This 

will ensure that the safety of the power tool is maintained.

■

Never service damaged battery packs. 

Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

CORDLESS HEDGE TRIMMER SAFETY WARNINGS

■

Keep all parts of the body away from the blade. Do 
not remove cut material or hold material to be cut 
when blades are moving. 

Blades continue to move 

after the switch is turned off. A moment of inattention 
while operating the hedge trimmer may result in serious 
personal injury.

■

Carry the hedge trimmer by the handle with the 
blade stopped and taking care not to operate any 
power switch. 

Proper carrying of the hedge trimmer will 

decrease the risk of inadvertent starting and resultant 
personal injury from the blades.

■

When transporting or storing the hedge trimmer, 
always fit the blade cover. 

Proper handling of the 

hedge trimmer will decrease the risk of personal injury 
from the blades.

■

When clearing jammed material or servicing the unit, 
make sure all power switches are off and the battery 
pack is removed or disconnected. 

Unexpected 

actuation of the hedge trimmer while clearing jammed 
material or servicing may result in serious personal 
injury.

■

Hold the hedge trimmer by insulated gripping 
surfaces only, because the blade may contact 
hidden wiring. 

Blades contacting a “live” wire may 

make exposed metal parts of the hedge trimmer “live” 
and could give the operator an electric shock.

■

Keep all power cords and cables away from cutting 
area. 

Power cords or cables may be hidden in hedges or 

bushes and can be accidentally cut by the blade.

■

Do not use the hedge trimmer in bad weather 
conditions, especially when there is a risk of 
lightning. 

This decreases the risk of being struck by 

lightning.

ADDITIONAL SAFETY WARNINGS

■

Do not attempt to cut stems or twigs that are larger 
than 22 mm thick for RY18HT45A or 24 mm thick for 
RY18HT50A, or are obviously too large to feed into the 
cutting blade. Use a non-powered hand saw or pruning 
saw to trim large stems.

■

While operating the product, always hold it firmly with 
both hands by the two handles.

■

Inspect the product before each use. Check for loose 
fasteners, etc. Make sure that all guards and handles are 
properly and securely attached. Replace any damaged 
parts before use. Check for battery pack leaks.

■

Check the hedges and bushes for foreign objects, such 
as wire fences and hidden wiring.

■

The product must be used only at ground level and not 
on any other unstable support.

■

Do not operate the product in poor lighting. The operator 
requires a clear view of the work area to identify potential 
hazards.

■

The use of hearing protection reduces the ability to hear 
warnings (shouts or alarms). The operator must pay 
extra attention to what is going on in the working area.

■

Turn off the product, remove the battery pack, and allow 
both to cool down. Make sure that all moving parts have 
come to a complete stop:

●

before adjusting the working position of the cutting 
means

●

before servicing

●

before clearing a blockage

●

before checking, cleaning, or working on the product

●

before changing accessories

●

before leaving the product unattended

●

before checking for damage after striking a foreign 
object

●

before performing maintenance

●

whenever the product starts to vibrate abnormally

■

Do not force the product through heavy shrubbery. This 
can cause the blades to bind and slow down. If the 
blades slow down, reduce the pace.

4

Original Instructions