Clatronic KM 3765 - Инструкция по эксплуатации - Страница 36

KM3765_IM 

21.04.20

36

  WARNING: Risk of Injury!

• 

Appliances can be used by persons with reduced physical, sen

-

sory, or mental capabilities or lack of experience and / or knowl

-

edge, if they are supervised or have been instructed concerning 

safe use of the appliance and understand the hazards involved.

• 

Do not repair the appliance by yourself. Always contact an 

authorized technician. If the supply cord is damaged, it must be 

replaced by the manufacturer, its service agent or similarly quali

-

fied persons in order to avoid a hazard.

  CAUTION:

Do not immerse the appliance into water for cleaning. Follow the 

instructions that we provide in the chapter “Cleaning”.

• 

Do not manipulate any of the safety switches.

• 

Only process foodstuffs with this appliance. Misuse of the appli

-

ance for other purposes may cause injury.

Unpacking the Appliance

1. 

Remove the packaging of the appliance.

2. 

Remove all packaging material such as plastic film, filler 

material, cable ties and box packaging. 

3. 

Check that all parts are in the box.

4. 

If the packaging content should be incomplete or if dam

-

ages should be noticeable, do not operate the appliance. 

Return it to the distributor immediately.

  NOTE:

Dust or production residues may still be found on the 

appliance. We recommend that you clean the appliance 

as described under “Cleaning”.

Overview of the Components /  

Scope of Delivery

1  Swivel arm

2  Motor housing

3  Swivel arm release button

4  Control knob

5  Mixing bowl

6  Splash guard

7  Whisk

8  Mixing hook

9  Kneading hook

Electric Connection

Check that the mains voltage to be used matches the volt

-

age of the appliance. Refer to the rating label for detailed 

specifications.

Functionality of the Appliance

Protective Features

• 

The appliance is equipped with a circuit breaker. The ap

-

pliance can only be operated if the following is observed: 

- 

The swivel arm is locked in place in the lowest 

position.

• 

The electronic speed regulation prohibits a motor drive 

overload automatically. The revolutions per minute are 

automatically regulated in the case of an overload.