BRAYER BR1105 - Инструкция по эксплуатации - Страница 9

9

EN

for 25 seconds. The operation time of the pump 25 

seconds is set by default.

Note

: - watch the cup filling with the ready coffee, if 

you need t switch the water supply off, press again the 

button (18) «

» or the button (20) «

».

• 

Switch the espresso machine off by pressing the on/
off button (17) «

», the buttons (17, 18, 19, 20) 

illumination will go out.

• 

Wait until the coffee maker cools down and remove 

the filter holder (5) by turning the handle (4) to the left 

«INSERT». Remove the ground coffee remnants and 

wash the filter (6).

• 

For easy removing of the coffee remnants use the 

retainer on the handle (4) to prevent the filter (6) from 

falling off the holder (5).

• 

Notes:

-

the cups should be preliminary heated up, when 

water heats up in the boiler, put the cups on the 

tray (8).

- if you need to promptly remove the filter holder 

(5), you have to reduce the pressure in the boiler, 

switch the coffee maker off by pressing the on/
off button (17) «

», place a suitable cup under 

the tip (12) and slightly open the steam supply by 

turning the knob (9) « 

 » counterclockwise. 

After the pressure in the boiler is released, you 

can re

move the filter 

holder (5).

ESPRESSO PORTION SETTING

-

To enter the programming mode, press and hold 

the one cup button (18) «

» for 3 seconds, the 

button (18) «

» illumination will be flashing. 

Press the button (18) «

» again. After the 

required amount of ready coffee is poured into the 

cup, press the button (18) «

» again to finish 

setting. Maximum time of water supply for making 

one cup of coffee is 45 seconds.

-

To enter the programming mode, press and hold 

the two cups button (20) «

» for 3 seconds, 

the button (20) «

» illumination will be 

flashing. Press the button (20) «

» again. After 

the required amount of ready coffee is poured into 

the cup, press the button (20) «

» again to 

finish setting. Maximum time of water supply for 

making two cups of coffee is 90 seconds.

Notes: 

- if you have programmed the water supply time 

for making one cup of coffee, then the water 

supply time for making two cups of coffee will be 

automatically set doubled;

- water supply time for two cups of coffee can be set 

up to 90 seconds. If the water supply time for two 

cups of coffee was set, then the water supply time 

for making one cup of coffee will be automatically 

set as half the time for making two cups of coffee.

RETURN TO THE FACTORY SETTINGS

•  Switch the espresso machine on and wait until the