BRAYER BR1105 - Инструкция по эксплуатации - Страница 8

8

EN

holder (5).

• 

Open the lid (14) and fill the tank (15) with water, or 

remove the tank (15) and fill it with water, then install 

the tank (15) back to its place.

• 

Install the coffee filter (6) into the holder (5) having 

preliminary matched the ledge on the filter (6) with 

the groove on the holder (5) and turn the filter (6) 

counter/clockwise to fix the filter.

• 

Install the filter holder (5) into the coffee maker. The 

holder (5) ledges should match the grooves on the 

boiler «INSERT », after that turn the filter holder 

handle (4) to the right until bumping «LOCK».

•  Place a suitable cup on the grid (2).

•  Insert the power plug into the mains socket.

•  Switch the espresso machine on by pressing the on/

off button (17) «

», the button (17) illumination 

will light up, and the illumination of buttons (18, 

19, 20) will be flashing. When the buttons (18, 19, 

20) illumination will glow constantly, it means that 

preheating is finished.

•  Switch the water supply on by pressing the button 

(20) «

», the pump will switch on for 25 seconds 

and hot water will be poured into the cup. After 

switching the pump off, pour the water out from the 

cup.Preheating is over.

MAKING ESPRESSO

AFTER PREHEATING:

•  Make sure that the steam supply is closed. To do this 

turn the knob (9) « 

 » clockwise until bumping 

«•».

• 

Remove the filter holder (5) by turning the handle (4) 

to the left «INSERT» and remove the filter holder (5).

• 

Put ground coffee in the filter (6), slightly tamp the 

ground coffee with the back side of the measuring 

spoon (16).

• 

Install the filter holder (5) into the coffee maker. The 

holder (5) ledges should match the grooves on the 

boiler «INSERT», after that turn the filter holder handle 

(4) to the right until bumping «LOCK».

•  Wait until the buttons (18, 19, 20) illumination glows 

constantly, the espresso machine is ready for 

operation.

•  Switch the water supply on by pressing the button 

(18) «

» to make one cup of coffee. The pump 

will switch on and will be operating for 15 seconds. 

The operation time of the pump 15 seconds is set by 

default. 

• 

To make two cups of coffee press the button (20) «

». The pump will switch on and will be operating 

ATTENTION!

When making coffee do not leave the operating 

coffee maker unattended, as it is necessary to watch 

the cup being filled with ready coffee!