BRAYER BR1105 - Инструкция по эксплуатации - Страница 6

6

EN

and apply to the service center.

• 

Transport the coffee maker in the original package.

• 

Keep the unit out of reach of children and disabled

•  persons.

COFFEE MAKER IS INTENDED FOR HOUSEHOLD 

USE ONLY, DO NOT USE THE COFFEE MAKER FOR 

COMMERCIAL OR LABORATORY PURPOSES.

BEFORE USING THE COFFEE MAKER

After unit transportation or storage at low 

temperature, it is necessary to keep it for at least 

three hours at room temperature.

• 

Unpack the coffee maker and remove all the 

packaging materials. 

•  Keep the original package.

• 

Read the safety measures and operating 

recommendations.

•  Check the delivery set.

• 

Examine the coffee maker for damages, in case of 

damage do not plug it into the mains.

• 

Make sure that the specifications of power supply 

voltage specified on the lower panel of the unit 

correspond to the specifications of your mains. 

• 

Wipe the surface of the coffee maker body with a 

clean, slightly damp cloth to remove dust. 

•  Make sure that the steam supply is closed. To do this 

turn the knob (9) « 

 » clockwise until bumping 

«•».

• 

Before using the espresso machine for the first time, 

wash all removable parts (1, 2, 5, 6, 12, 15, 16) with 

warm water and neutral detergent, rinse and dry 

them.

• 

Remove the water tank (15), fill it with cold water up 

to the MAX mark and install it back to its place.

Notes: 

- to fill the water tank (15) with water you can open 

the lid (14) and pour water into the tank (15).

-

to carry the water tank (15), take it by the handle 

(13).

• 

Install the coffee filter (6) (do not add ground coffee 

into the filter) into the holder (5) having preliminary 

matched the ledge on the filter (6) with the groove on 

the holder (5) and turn the filter (6) counter/clockwise 

to fix the filter.

• 

Install the filter holder (5) into the coffee maker. The 

holder (5) ledges should match the grooves on the 

boiler «INSERT», after that turn the filter holder 

handle (4) to the right until bumping «LOCK».

•  Place a suitable cup on the grid (2).

•  Insert the power plug into the mains socket.

Note:

 - the buttons on the control panel (7) are 

sensory, you just need to touch the button to switch the 

necessary operation mode on.
•  Switch the espresso machine on by pressing the on/

off button (17) «

», the button (17) illumination 

will light up, and the illumination of buttons (18,