BRAYER BR1105 - Инструкция по эксплуатации - Страница 12

12 EN

more, hot water will be poured into the cup.

•  Turn the steam supply control knob (9) «

» 

clockwise to the position «o» to switch the hot water 

supply off.

Notes: 

- if you need to stop the water supply, press the 

button (20) «

» again;

-

you can set up the pump operation time (see the 

chapter «ESPRESSO PORTION SETTING»). 

WARMING THE DRINKS

You can warm up your drinks by putting the 

cappuccinator pipe (10) without the tip (12) into the cup 

with the drink.
•  Switch the espresso machine on and wait until the 

espresso machine is preheated and the buttons (18, 

19, 20) illumination glows constantly.

•  Press the steam supply button (19) « ».

•  Put the cappuccinator pipe (10) without the tip (12) 

into the cup with the drink you want to warm up. 

Carefully turn the steam supply control knob (9) « 

 » counterclockwise.

•  Close the steam supply by turning the knob (15) « 

 » clockwise until bumping «•».

• 

Switch the coffee maker off by pressing the on/
off button (17) «

», the buttons (17, 18, 19, 20) 

illumination will go out.

TROUBLESHOOTING

Problem

Cause

Solution

Water leaks from 

the bottom of the 

coffee maker

The tray is full of 

water.

Please, clean the tray.

The coffee 

maker is 

damaged.

Please, apply to the service 

center for repairing the 

coffee maker.

Water leaks from 

the filter holder.

There is ground 

coffee on the 

filter.

Clean the filter edges from 

ground coffee.

Ready coffee 

has unpleasant 

taste.

The coffee 

maker was not 

washed after 

descaling.

Clean the coffee maker 

from mineral scale and 

wash it from the remaining 

descaling agent.

Ground coffee 

was stored in a 

humid place for 

a long time. 

Please, use fresh ground 

coffee. Keep unused 

ground coffee in a hermetic 

package in a dry cool place. 

The unit cannot 

be switched on

No voltage in the 

mains socket.
The power plug 

is not completely 

inserted into the 

socket.

Make sure that the mains 

socket is properly operating.
Check whether the power 

plug is completely inserted 

into the socket.

Steam doesn’t 

froth milk 

The steam ready 

indicator is 

flashing. 

You can use steam to froth 

milk only after the indicator 

starts glowing white.

The used cup 

does not suit 

for proper milk 

frothing.

Use a tall and narrow cup.

You used 

skimmed milk.

Use only whole milk with fat 

content 4-6%.