BRAYER BR1105 - Инструкция по эксплуатации - Страница 11

11

EN

achieve good results.

• 

When frothing milk you can remove the tip (12) and 

try to froth milk directly with the steam releasing from 

the cappuccinator pipe (10).

•  Close the steam supply by turning the knob (9) « 

 » clockwise until bumping «•».

• 

Add frothed milk to the ready espresso, and the 

cappuccino is ready. Add sugar to your taste, you can 

decorate frothed milk with cocoa powder.

• 

Switch the coffee maker off by pressing the on/
off button (17) «

», the buttons (17, 18, 19, 20) 

illumination will go out.

IMPORTANT:

- It is important that milk for making frothed milk is 

fresh and without additives.

- Take usual whole milk with fat status from 4% to 

6%, cream fat status is not less than 10%.

-

Clean the cappuccinator pipe tip (12) right 

after milk or cream frothing — to do this put the 

cappuccinator pipe tip (12) into a glass of water 

and switch the steam supply on by pressing 

the button (9), turn the steam supply knob (9) « 

 » counterclockwise to release some steam. 

After that close the steam supply by turning the 

knob (9) « 

 » clockwise until bumping «•». 

Switch the steam supply off by pressing the steam 

supply button (9) and switch the coffee maker off.

- Wait until the coffee maker cools down and 

remove the tip (12) from the cappuccinator pipe 

(10), wipe the outer side of the cappuccinator pipe 

(10) with a soft damp cloth and wash the tip (12) 

under a water jet.

Note: 

after frothing milk, if you press the water supply 

button (18) «

» or the button (20) «

», and 

the button (18) «

», (19) « » and (20) «

» 

illumination will be flashing quickly, the pump will not 

switch on, because the water temperature in the boiler 

is high. To decrease the water temperature, place 

a cup under the tip (12), turn the knob (9) «

» 

counterclockwise and drain hot water. When the buttons 

(18, 19, 20) illumination glows constantly, the pump will 

stop operating, turn the knob (9) «

» to the position 

«o». After that you can continue making coffee.

HOT WATER AND ITS USAGE

• 

You can use hot water for warming the cups before 

making coffee or, for instance, for brewing tea.

•  Drain hot water to decrease the boiler temperature 

after frothing the milk.

•  Switch the espresso machine on and wait until the 

espresso machine is preheated and the buttons (18, 

19, 20) illumination glows constantly. 

•  Place a cup under the tip (12) and switch the water 

supply on by pressing the button (20) «

», 

carefully turn the steam supply control knob (9) «

» counterclockwise for a quarter of a turn or