BRAYER BR1105 - Инструкция по эксплуатации - Страница 7

7

EN

19, 20) will be flashing. When the buttons (18, 19, 

20) illumination will glow constantly, it means that 

preheating is finished.

Notes:

- when switching the unit for the first time, the 

buttons (18, 19, 20) illumination will be flashing 

quickly, because the boiler is empty. Press the 

two cups button (20) «

», the pump will be 

switched on and start injecting water into the 

boiler, the buttons (18, 19, 20) illumination will stop 

flashing and start glowing constantly;

- the first switching on of the pump may be 

accompanied by an uncharacteristic sound, this 

is a normal. After filling the boiler with water, the 

sound of the pump will return to normal.

•  Wait until the buttons (18, 19, 20) illumination glows 

constantly, then switch the water supply on by 

pressing the button (20) «

», the pump will switch 

on for 25 seconds, pour the water out from the cup 

and press the button (20) again «

» to switch the 

water supply on again. After switching the pump off, 

pour the water out from the cup.

•  Repeat this procedure several times, the boiler will 

be clean after that.

• 

To switch the espresso machine off, press the on/
off button (17) «

», the buttons (17, 18, 19, 20) 

illumination will go out.

AUTO SWITCH OFF FUNCTION

• 

If no actions were performed during 25 minutes 

after switching on, the coffee maker will switch off 

automatically.

HOW TO MAKE A GOOD ESPRESSO

• 

Use ground coffee for espresso coffee makers.

• 

Slightly tamp the ground coffee in the filter (6), you 

can do it with the back side of the measuring spoon 

(17).

• 

Coffee strength depends on the quality and grinding 

degree of coffee beans. If coffee is pouring out too 

long, this means the coffee powder is too fine or it is 

tamped too strongly.

PREHEATING

• 

To make a cup of hot espresso, it is recommended to 

preliminary heat up the coffee filter (6) and the filter 

ATTENTION!

• 

Do not remove the filter holder (5) during espresso 

machine operation.

• 

Do not remove the filter holder (5) immediately 

after preparing coffee as there is redundant water 

and steam pressure inside the filter (5), let the 

coffee maker cool down completely.

• 

To remove the filter holder (5) turn the handle (4) to 

the left «INSERT» and remove the filter holder (5).