Krups EA894T10 Evidence Plus - Инструкция по эксплуатации - Страница 38

When the number of drinks is not enough for descaling to be necessary, the function is not active.

You can also start the descaling program when you want:

-  Fill the water tank up to the 

CALC

 mark.

- Pour the dose of descaler into the water tank.
- Press the Settings button

.  

- Select Maintenance.
- Then Descaling.

!

Important: 

 if you unplug your machine during cleaning or in the event of electrical failure, the descaling program 
will resume the current step at the time of the incident. It will not be possible to postpone this operation. 
Complete the full descaling cycle in order to remove all traces of the descaling product which is harmful 
to health.

TROUBLESHOOTING

PROBLEM

CORRECTIVE ACTIONS

OPERATION

The machine displays a fault, the 
software is frozen.
OR
Your machine has a malfunction.

Turn off and unplug the machine, remove the filter cartridge, 
wait a minute and restart the machine.
Press and hold the on/off button for at least 3 seconds for 
starting.

The appliance does not turn on after 
pressing the On/Off button (for at least 
3 seconds). 

Check the fuses and the power socket of your electrical 
installation.
Check that the two power plugs are correctly inserted into 
the socket.

The appliance must be disconnected 
and reconnected.

Unplug the appliance for 20 seconds, remove the Claris 
Aqua Filter System cartridge if necessary, then put it back 
into service.

A power failure has occurred during a 
cycle.

The appliance resets automatically when it turns back on.

USE

The grinder makes an abnormal noise.

Foreign bodies are surely present in the grinder.

There is water under the appliance.

Before removing the water tank, wait 15 seconds after the flow 
of coffee so that the machine finishes its cycle correctly.
Verify that the drip tray is well positioned on the machine. It 
must always be in place even when the machine is not in use.
Verify that the drip tray is not full.

When switching off, hot water flows 
through the coffee outputs and the One 
Touch Cappuccino block.

Depending on the type of preparation the machine can 
perform automatic rinsing during its powering off.
The cycle lasts only a few seconds and stops automatically.

The adjustment button for the grinding 
fineness is difficult to turn.

Turn the adjustment button of the grinding fineness only 
when the grinder is operating.

The appliance has not issued any 
coffee.

An incident has been detected during its making.
The appliance is reset automatically and is ready for a new 
cycle.

You have used ground coffee instead of 
coffee beans.

Use your vacuum cleaner to collect the ground coffee 
contained in the bean container.

36