Siemens TE501203RW - Инструкция по эксплуатации - Страница 21

21

en

Problem

Cause

Remedy

Coffee is too “bitter”.

The grind setting is too fine 

or the pre-ground coffee is 

too fine.

Adjust the grinding unit to 

a coarser setting or use 

 coarser pre-ground coffee.

Unsuitable type of coffee.

Change the type of coffee.

The water filter does not 

stay in position in the water 

tank (16).

The water filter is not fitted 

correctly.

Firmly press the water filter 

straight down into the tank 

connection.

The coffee grounds are not 

compact and are too wet.

The grind setting is too fine 

or too coarse, or not enough 

ground coffee has been 

used.

Adjust the grinding unit to 

a coarser or finer setting, 

or use 2 level measuring 

spoons of ground coffee.

LED 

D

 lights up

Water tank has been 

incorrectly inserted or the 

new water filter has not 

been rinsed according to 

instructions.

Insert the water tank  

correctly or rinse the water 

filter according to instruc-

tions and then switch on.

LED 

I

 flashes.

Brewing unit  (5) is soiled.

Clean the brewing  unit (5).

Too much pre-ground coffee 

in the brewing unit (5).

Clean the brewing unit (5)

(Put in no more than 2 level 

measuring spoons of ground 

coffee).

The brewing unit 

 mechanism is stiff.

Remove and clean the 

brewing unit

, see “Mainte-

nance and daily cleaning”.

Coffee or milk froth quality 

varies widely. 

Build-up of limescale in the 

appliance.

Descale the appliance with 

two descaling tablets as de-

scribed in the instructions.

Water dripped onto the in-

ner floor of the appliance 

when the drip tray (8) was 

removed.

Drip tray (8) removed too 

soon.

Wait a few seconds after 

the last drink was dispensed 

before removing the drip 

tray (8).

LED 

I

 lights up.

Brewing unit (5) is missing 

or has not been detected.

Switch off the appliance 

with the brewing unit (5) in 

place, wait three seconds 

and switch on the appliance 

again.

If you are unable to solve the problem, please call the hotline. 

You will find the telephone numbers at the back of these instructions.

Simple troubleshooting