Siemens TE501203RW - Инструкция по эксплуатации - Страница 20

20

en

Problem

Cause

Remedy

Grinding unit does not grind 

the beans.

Beans are not falling into 

the grinding unit (beans too 

oily).

Gently tap the bean con-

tainer (1). Change the type 

of coffee if necessary.  

When the bean container (1) 

is empty, wipe it with a dry 

cloth.

No hot water dispensed.

The milk frother (6) is soiled. Clean the milk frother (6)

,

see “Maintenance and daily 

cleaning”.

Too little or no milk froth.

The milk frother (6)

is soiled. Clean the milk frother (6)

,

see “Maintenance and daily 

cleaning”.

Milk unsuitable for frothing.

Use milk with a fat content of 

at least 1.5%.

The milk frother (6) is not 

 assembled correctly.

Wet the milk frother parts

and press together firmly.

Build-up of limescale in the 

appliance.

Descale the appliance us-

ing two descaling tablets, 

if  necessary repeat the 

procedure.

Coffee dispensing slows to a 

trickle or stops completely.

The grind setting is too fine 

or the pre-ground coffee is 

too fine.

Adjust the grinding unit to 

a coarser setting or use 

 coarser pre-ground coffee.

Build-up of limescale in the 

appliance.

Descale the appliance.

Coffee has no “crema”.

Unsuitable type of coffee.

Use a type of coffee with a 

higher proportion of robusta 

beans.

The beans are no longer 

fresh.

Use fresh beans.

The grind setting is not 

 suitable for the beans.

Adjust the grind setting to 

fine.

Coffee is too “acidic”.

The grind setting is too 

coarse or the pre-ground 

coffee is too coarse.

Adjust the grinding unit to 

a finer setting or use finer 

 pre-ground coffee.

Unsuitable type of coffee.

Use a darker roast.

If you are unable to solve the problem, please call the hotline. 

You will find the telephone numbers at the back of these instructions.

Simple troubleshooting