Siemens TE501203RW - Инструкция по эксплуатации - Страница 16

16

en

8.  Attach the milk frother to the steam 

valve. Check that the red mark on the 

steam valve is covered.

¡

¡

Risk of scalding!

Only use the appliance when the milk froth-

er (6) is completely assembled and fitted.

Cleaning the brewing unit

Clean the brewing unit regularly. 

To pre-clean the brewing unit automatically:

Press the service button (12) briefly. The 

appliance will rinse if coffee was dispensed 

previously. It then switches off.

In addition to the automatic cleaning pro-

gramme, the brewing unit (5a) should be 

removed regularly for cleaning (

Figure E

 at 

the beginning of the instructions).

1.  Press the power on/off switch 

O / I

 (9) to 

switch off the appliance. All lights go off.

2.  Open the door (5b) to the brewing unit.

3.  Slide the red lock (5d) on the brewing 

unit completely to the left.

4.  Press the red pushbutton (5c), grasp the 

brewing unit by the recessed grips and 

withdraw it from the appliance.

5.  Rinse the brewing unit (5a) thoroughly 

under running water.

6.  Hold the brewing unit sieve under the 

running water.

Important

: Do not clean with detergent or 

other cleaning agents and do not put it in 

the dishwasher.

7.  Wipe out the inside of the appliance 

thoroughly with a damp cloth and 

 remove any coffee residues.

8.  Allow the brewing unit (5a) and the 

 interior of the appliance to dry.

9.  Reinsert the brewing unit (5a) fully into 

the appliance.

10. Slide the red lock (5d) fully to the right 

and close the door (5b).