Siemens TE501203RW - Инструкция по эксплуатации - Страница 17

17

en

Note:

 After cleaning thoroughly, the seals 

on the brewing unit should be greased 

regularly to keep them in ideal condition. 

Apply a thin layer of the special grease 

intended for this purpose (order no. 311368) 

all around the seals.

Tips on saving energy

● The fully automatic espresso machine 

switches off automatically after one hour 

(default setting). The default time of one 

hour can be shortened (see “Settings”, 

“Automatic switch-off” on page 11).

● Switch off the fully automatic espresso 

machine when not in use. To do this, 

press the service button (12). The appli-

ance rinses and switches off.

● If possible, do not interrupt coffee or milk 

froth dispensing. Stopping a process 

prematurely results in higher energy con-

sumption and the drip tray fills up more 

quickly.

● Descale the appliance regularly to avoid 

a build-up of limescale. Limescale residue 

results in higher energy consumption.

Service programme

Duration: approx. 35 minutes

Depending on use, the service button (12) 

flashes at certain intervals.

The appliance should be cleaned and 

descaled immediately using the service 

programme. If the service programme is 

not run as instructed, the appliance may be 

damaged.

¡

¡

Caution!

Follow the instructions for using the descal-

ing and cleaning agents for each service 

programme. Please observe the safety 

instructions on the packaging of the cleaning 

agent.

Never interrupt the service programme.  

Do not drink the liquids.

Never use vinegar, vinegar-based products, 

citric acid or citric acid-based products. 

Never put descaling tablets or other descal-

ing agents in the drawer (4).

Specially developed and suitable descal-

ing and cleaning tablets are available 

from retailers or customer service.

Order number

Retailer

Customer 

service

Cleaning 

tablets

TZ60001

310575

Descaling 

tablets

TZ60002

310967

Important:

 If there is a water filter in the 

water tank (16), it must be removed before 

starting the service programme.

To start the service programme, press and 

hold the service button (12) for at least 

5 seconds. 

Information:

 The service button (12) 

flashes while the programme is running.