Kaiser KS 90210 G - Инструкция по эксплуатации - Страница 6

6

EN

IINSTALLATION  INSTRUCTIONS

ELECTRICAL CONNECTION

Before connecting the refrigerator to 

the mains power supply, make sure 

that:

• The supply voltage corresponds to 

the  specifications  on  the  data  plate 

on the front of the oven.

• The  mains  supply  has  an  efficient 

ground connection complying with 

all applicable laws and regulations.

Correct grounding is a legal require-

ment.  If  the  appliance  is  not  pre-fitted 

with a power cable and/or plug, use 

only suitable cables and plugs capa-

ble of handling the power specified on 

the appliance’s data plate and capa-

ble of resisting heat. The power cable 

should never reach a temperature 50 

°C above ambient temperature at any 

point along its length. 

If the appliance is to be connected di-

rectly  to  mains  terminals,  fit  a  switch 

with minimum aperture of 3 mm be-

tween the contacts. Make sure that 

the  switch  is  of  sufficient  capacity  for 

the power specified on the appliance’s 

data plate, and compliant with applica-

ble regulations. The switch must not 

break the yellow-green earth wire. The 

socket or switch must be easily reach-

able with the oven fully installed.

Attention! 

Installation and electri-

cal connection must be made by a 

qualified expert only.

! 

Attention! 

The manufacturer de-

clines all responsibility for damage 

or injury if the above instructions 

and normal safety precautions are 

not respected.

!