Kaiser KS 90210 G - Инструкция по эксплуатации - Страница 56

56

EN

• After the refrigerator has been 

switched on, it takes a few minutes 

for the compartments to cool: If 

the temperature of a compartment 

is higher when the refrigerator is 

switched on, it will take a few more 

minutes to drop.

• The compressor’s surface is heat-

ed: It is normal for the compressor’s 

surface to warm up during the refrig-

erator’s operation. Do not touch it.

BEFORE CALLING THE SERVICE 

CENTRE

Check the following.

Water gets inside the refrigerator

• The weather is hot and humid.

• The door is not properly closed.

• The door has been left open for a 

long time or is opened too often.

• Perhaps there are leaking products 

inside the refrigerator?

The refrigerator does not cool

• Make sure that there is current in 

the mains.

• Make sure that the cord is connect-

ed to the socket.

• Make sure that the fuse or breaker 

has not tripped.

• Measure the socket voltage. If it is 

low, switch to low voltage.

• Use a different supply circuit. If you 

are not sure about socket’s running 

order, contact an electrician to have 

it inspected.

Excessive noise

• The refrigerator has not been prop-

erly aligned.

• The refrigerator is in contact with the wall.

• Present-day refrigerators feature 

larger capacity and more stable 

temperatures. They need a higher-

powered compressor.

• The  refrigerator  is  exposed  to  el-

evated pressure when it starts.

• The refrigerant coolant (used to cool 

the  refrigerator)  circulates  in  the