STIGA Twinclip 950 V 294513048/ST1 - Инструкция по эксплуатации - Страница 71

EN - 1

EN

WARNING: READ THE INSTRUCTION BOOKLET THOROUGHLY BEFORE USING THE MACHINE. 

Keep for future reference.

INDEX

1.  GENERAL INFORMATION

 1.1  HOW TO READ THE MANUAL

Some paragraphs in the manual contain important 

information regarding safety and operation 

and are emphasized in this manner:

NOTE OR IMPORTANT 

 These give details or 

further information on what has already been said, 

and aim to prevent damage to the machine.

The 

 symbol highlights danger. Failure to observe the 

warning can lead to the risk of injury to oneself and others 

and/or damage.

The paragraphs highlighted in a square with 

grey spots indicate the optional characteristics 

not on all models documented in this manual. 

Check if the characteristic is on this model.

Whenever reference is made to a position on the 

machine such as "front”, "back”, "left” or "right” 

hand side, this is determined from where the 

operator is in normal operating position.

 1.2  REFERENCES

 1.2.1  Figures

The figures in these instructions for 

use are numbered 1, 2, 3, etc.

The components indicated in the figures are 

identified with letters A, B, C, and so on.

Reference to component C in figure 2 is indicated with 

the wording: “See fig. 2.C” or simply "(Fig. 2.C)".

The figures are given as a guide only. The actual pieces 

can differ from those illustrated in this document.

 1.2.2  Titles

The manual is divided into chapters and paragraphs. 

The title of paragraph “2.1 Training” is a subtitle of “2.

Safety regulations". References to titles or paragraphs 

are marked with the abbreviation chap. or par. and the 

relevant number. Example: “chap. 2” or “par. 2.1"

2.  SAFETY REGULATIONS

 2.1  TRAINING

  Become acquainted with the controls and the pro-

per use of the machine. Learn how to stop the engine 

quickly. Failure to follow the warnings and instructions 

may result in fire and/or serious injury.

1.  GENERAL INFORMATION .......................................... 1

  1.1  How to read the manual

 ...................................... 1

  1.2  References

 .......................................................... 1

2.  SAFETY REGULATIONS ............................................. 1

  2.1  Training

 ................................................................ 1

  2.2  Preliminary procedures

 ....................................... 2

  2.3  During operation

 ................................................. 2

  2.4  Maintenance, storage and transport

 .................. 3

  2.5  Environmental protection

 .................................... 3

3.  GETTING TO KNOW THE MACHINE .......................... 3

  3.1  Description of the machine and planned use

 ..... 3

  3.2  Safety signs

 .........................................................

4

  3.3  Identification label

 ...............................................

4

  3.4  Main components

 ................................................

4

4.  ASSEMBLY

 ...................................................................

4

  4.1  Assembly components

 ....................................... 5

  4.2  Grass catcher assembly

 ..................................... 5

  4.3  Handle assembly

 ................................................ 5

5. CONTROLS .................................................................. 5

  5.1  Manual starter handgrip

 ...................................... 5

  5.2  Electric push-button starter switch

 ..................... 5

  5.3  Throttle control

 .................................................... 5

  5.4  Speed control lever

 ............................................. 5

  5.5  Engine brake lever / cutting means

 ..................... 5

  5.6  Drive engagement lever

 ...................................... 5

  5.7  Cutting height adjustment

 ................................... 5

6.  USING THE MACHINE ................................................. 6

  6.1  Preliminary procedures

 ....................................... 6

  6.2  Safety checks

 ...................................................... 7

  6.3  Start-up

 ............................................................... 7

  6.4  Operation

 ............................................................ 8

  6.5  Stop 8

  6.6  After operation

..................................................... 8

7.  ROUTINE MAINTENANCE .......................................... 9

  7.1  General information

 ............................................ 9

  7.2  Refuelling

 ............................................................ 9

  7.3  Check/top-up engine oil

 ...................................... 9

  7.4  Cleaning

 .............................................................. 9

  7.5  Nuts and bolts

 ................................................... 10

  7.6  Battery

 ............................................................... 10

  7.7  Adjusting the converter cable

 ........................... 10

8.  OCCASIONAL MAINTENANCE ................................. 10

  8.1  Cutting means

 ................................................... 10

9. STORAGE................................................................... 10

  9.1  Vertical storage

 ................................................. 10

10.  HANDLING AND TRANSPORTATION .......................11

11.  ASSISTANCE AND REPAIRS .....................................11

12.  WARRANTY COVERAGE ...........................................11

13.  MAINTENANCE TABLE ............................................. 12

14.  PROBLEM IDENTIFICATION

 ..................................... 12

15.  ATTACHMENTS ON REQUEST

 ................................ 13

  15.1  "Mulching" kit

..................................................... 13