Fulgor Milano SPO 6213 P TC X - Инструкция по эксплуатации - Страница 32

GB

30

When finished with the settings, the display 
summarizes the recipe set. The colon in the cooking 
time (00:30) will be flashing to indicate that it can be 
changed.
To change it, use the - +  buttons.

Or select the 

 function directly and, in this way, the 

cooking program starts with a countdown of the preset 
time on the display.

ATTENTION: certain recipes use pre-heating, so put the dish in when 
the oven has reached the set temperature and the display shows “PRE-
HEATING FINISHED PUT IN THE DISH”

When cooking is finished the display will flash “PROGRAM FINISHED 
REMOVE THE DISH” and, at the same time, the oven will beep until you 
press a key or open the door.

Note: at any moment, if you make a mistake choosing the values and/or you want to 
change the settings of your recipe, you can select 

 which cancels it and allows you 

start over from the beginning of the procedure.

NOTE: If you are cooking with the modified parameters of a pre-set recipe, while the 
oven beeps at the end of cooking, you will see: 

see how to save recipes in the next paragraph.

Personalising recipes

Once you have changed the cooking time of a preset recipe and executed it, you can 
save it for the next by storing the new parameters you used (weight and cooking time).

At the end of the cooking cycle of the modified recipe, the icon below will appear and, to 
save it, proceed as follows:

- with the + key select “YES”
- confirm with   the time used is displayed,
- change it with + and - and confirm with   , the weight used appears,
- change it with + and - and confirm with   , you will see the message

“Recipe saved POS. 001”, and so on, in ascending order

Each time you access the “PERSONAL RECIPES” menu, you will find it saved in your 
recipes.