Franke FMA 97 P XS - Инструкция по эксплуатации - Страница 6

6

1.

 SETTING THE TIME

You will need to set the time when you switch on the 

appliance for the first time: Press 

 until the 

icon and the two digits for the hour start flashing on 

the display�

Use   or   to set the hour and press 

 to confirm� 

The two digits for the minutes will start flashing� Use 

 or   to set the minutes and press 

 to confirm�

Please note: When the 

 icon is flashing, for example 

following lengthy power outages, you will need to reset the 

time.

2.

 SET THE POWER CONSUMPTION

The oven is programmed to work at a power of less 

than 2�9 kW (“Lo”): To operate the oven at a power that 

is compatible with a domestic power supply of greater 

than 3 kW (“Hi”), you will need to change the settings� 
To go to the change menu, turn the selection knob to 

, then turn it back to  �

Press and hold   and   for five seconds immediately 

afterwards� 

Use   or   to change the setting, then press and 

hold   for at least two seconds to confirm�

3.

 HEAT THE OVEN

A new oven may release odours that have been left 

behind during manufacturing: This is completely 

normal� 

Before starting to cook food, we therefore 

recommend heating the oven with it empty in order 

to remove any possible odours�
Remove any protective cardboard or transparent film 

from the oven and remove any accessories from inside 

it�
Heat the oven to 250 ° C for about one hour, 

preferably using the “Maxi Cooking” function� The 

oven must be empty during this time� 

Follow the instructions for setting the function 

correctly� 

Please note: It is advisable to air the room after using the 

appliance for the first time. 

FIRST TIME USE

1.

 SELECT A FUNCTION

To select a function, turn the 

selection knob 

to the 

symbol for the function you require: the display will 

light up and an audible signal will sound�

2.

 ACTIVATE A FUNCTION 

MANUAL

To start the function you have selected, turn the 

thermostat knob

 to set the temperature you require�

Please note: During cooking you can change the function 

by turning the 

selection knob

 or adjust the temperature by 

turning the 

thermostat knob

.

The function will only start if the thermostat knob is on 0 °C. 

You can set the cooking time, cooking end time (only if you 

set a cooking time) and a timer.

AUTOMATIC

To start the automatic function you have selected 

(“Bread” or “Dessert”), keep the 

thermostat knob

 at the 

position for automatic functions (0)�

To finish cooking, turn the 

selection knob

 to position 0�

Please note: You can set the cooking end time and timer.

RISING

To start the “Rising” function, turn the 

thermostat 

knob

 to the relevant symbol; if the oven is set to a 

different temperature, the function will not start�

Please note: You can set the cooking time, cooking end time 

(only if you set a cooking time) and a timer.

3.

 PREHEATING AND RESIDUAL HEAT

Once the function starts, an audible signal and a 

flashing icon   on the display indicate that the 

preheating phase is active� When the set temperature 

has been reached, the icon becomes fixed and a new 

audible signal will sound to indicate that the food can 

be placed inside and cooking can proceed�

DAILY USE