Philips HR1653 - Инструкция по эксплуатации - Страница 10

Whisk

The whisk is intended for whipping cream, whisking egg whites, desser ts etc.

Caution: Do not process more than 1 batch without interruption. Let the appliance cool down 

for 5 minutes before you continue processing.

 1 

 Connect the whisk to the coupling unit (‘click’) (Fig. 8).

 2 

 Put the ingredients in a bowl.

See the table for the recommended quantities and processing times.

Whisking quantities and processing times

Ingredients

Whisking quantity

Time

Cream

250ml

70-90sec.

Egg whites

4 eggs

120sec.

 3 

 Connect the coupling unit to the motor unit (‘click’).

 4 

 Put the plug in the wall socket and press the on/off button.

 5 

 After approx. 1 minute, you can press the turbo button to continue at turbo speed.

Whisking tips

 -

If you want to process a small quantity, tilt the beaker slightly for a quicker result.  (Fig. 9)

 - When you beat egg whites, use a large bowl for the best result.

 - To prevent splashing, star t at a low speed setting and continue with a higher speed after approx. 

1 minute.

 - When you whip cream, use the beaker to avoid splashing.

Note: Do not use the whisk to prepare dough or cake mixture.

Detaching the whisk

 1 

 To detach the whisk, press the release button. 

 2 

 To detach the coupling unit, pull it from the whisk. 

Potato bar (HR1655 only)

The potato bar can be used to mash cooked ingredients such as potatoes, swede and peas.

Caution

 - Never use the potato bar to mash ingredients in a pan over direct heat. Always remove the pan 

from the heat and allow the ingredients to cool slightly before you star t mashing them.

 - Do not mash hard or uncooked foods, as this may damage the potato bar.

 - Do not tap the potato bar on the side of the pan during or after mashing. Use a spatula to 

remove excess food.

 - Do not process more than 1 batch without interruption. Let the appliance cool down for 5 

minutes before you continue processing.

 1 

 Cook and drain the potatoes. 

 2 

 Connect the potato bar to the coupling unit by turning it clockwise (“click”) (Fig. 10).

 3 

 Connect the coupling unit to the motor unit (Fig. 11).

EnglisH

10