Bosch MMBH6P6B - Инструкция по эксплуатации - Страница 18

18 

en 

Use 

Pusher

To push ingredients that either stick to 

the edge or do not blend well towards the 

blender knife. To do so, turn the locking cap 

anticlockwise, remove and place the pusher 

into the opening. 

X

 “Using the pusher” see 

page 19

Safety systems

The appliance has various safety systems. 

X

 “Safety systems” see page 21

Use

W

Risk of injury!

– Do not insert the mains plug until 

all preparations for working with the 

appliance are complete and the blender 

jug has been correctly positioned on to 

the base unit.

– Never put your hand in the blender jug 

once it is in place, and always put the lid 

on before using the appliance.

Note:

 The appliance will only work if the 

blender jug has been correctly positioned.

X

Fig.

B

1. 

Place the base unit onto a stable and 

level work surface. Position the cushion 

pad on to the base unit, observing the 

recess.

Important:

 Never attach the blender jug 

without the cushion pad.

2. 

Place the blender jug on to the cushion 

pad. Make sure the blender jug is firmly 

positioned on the appliance.

3. 

Put the desired ingredients into the 

blender jug. 

4. 

Put the lid with the locking cap in place 

and press it firmly.

5. 

Turn the rotary selector in an 

anticlockwise direction as far as it will go 

(zero setting).

6. 

Plug the mains plug into the mains. 

Switch on the appliance with the on/off 

switch. All LEDs are lit.

7. 

Slowly turn the rotary switch clockwise 

until the desired speed is reached. The 

status LED lights up. 

Note:

 Using the programme buttons 

X

 “Automatic programmes” see 

page 19

.

8. 

Process the ingredients until the desired 

consistency is achieved.

9. 

Turn the rotary selector in an 

anticlockwise direction as far as it will go 

(zero setting). Wait until the appliance 

comes to a standstill.

10. 

Switch off the appliance with the on/off 

switch. Disconnect the mains plug.

11. 

Remove the blender jug. Remove 

the lid.

12. 

Pour the blended food into another 

container.

Clean all parts. 

X

 “Cleaning and 

maintenance” see page 20

Adding more ingredients 

X

Fig.

C

1. 

Turn the locking cap in an anticlockwise 

direction and remove.

2. 

Add more chopped or liquid ingredients 

through the opening, remembering to 

observe the maximum capacity.

3. 

Put on the locking cap and tighten it by 

turning in a clockwise direction.

4. 

Process the ingredients until the desired 

consistency is achieved.

X 

Fig.

D

Adding larger quantities:

1. 

Turn the rotary selector in an 

anticlockwise direction as far as it will go 

(zero setting). Wait until the appliance 

comes to a standstill.

2. 

Switch off the appliance with the on/off 

switch. Disconnect the mains plug.

W

Risk of injury!

Never remove the lid while the appliance is 

plugged in.

3. 

Remove the lid. 

4. 

Add the extra ingredients.

5. 

Replace the lid. 

6. 

Plug the mains plug into the mains. 

Switch on the appliance with the on/off 

switch. All LEDs are lit.