Bosch MMBH6P6B - Инструкция по эксплуатации - Страница 17

 17

 en

Parts and operating controls

Parts and operating controls

High-speed motor block

The blender is equipped with a high-

speed motor with a motor speed of up to 

45000 revolutions per minute.

 This not 

only provides particularly fast and fine 

blending results but also makes it possible 

to heat food. Using the 

Soup

 automatic 

programme, for example, a hot soup can be 

made from cold ingredients.

Note:

 At the 

max

 speed setting, the blender 

runs at the highest speed when using the 

Pulse

 button and with certain automatic 

programmes. In order to prevent unwanted 

heating of food, process the ingredients for 

a shorter time or at a lower speed. 

on/off switch

To switch the appliance on and off.

Status display

To display the appliance status and as 

a mark for the zero setting of the rotary 

selector.

Display

Display lights up:

 appliance is switched 

on and ready for use

Display flashes: 

– fault in the appliance

– Blender jug is not correctly positioned 

or has become detached

– Rotary selector not at zero setting 

when switched on 

–

after interruption of the power supply

– longer than 5½ minutes of continuous 

operation (manual mode)

Rotary selector

For continuous adjustment of the blender 

knife speed.

Settings

Zero setting

 (mark points to the status 

display) = standstill

min

Lowest speed

max

Highest speed

Caution!

When the appliance automatically turns off 

after 5½ minutes of continuous operation at 

the 

max

 speed setting, only use the 

max

speed setting for another 1-2 minutes at 

the most after turning the machine back on. 

Otherwise, the food may heat up too much 

and damage the container.

Notes: 

–

The status display flashes if the rotary 

selector is not at the zero setting when 

switched on, if the blender jug has 

become detached, or if the electricity 

supply has been interrupted. Turn the 

rotary selector first to the zero setting 

and then continue.

–

The rotary selector setting does not 

affect the use of the 

Pulse

 function.

Pulse button

For switching to the maximum speed 

for a short time. The appliance works at 

maximum speed while the 

Pulse

 button is 

pressed. 

Note:

 The function cannot be used while an 

automatic programme is running.

Programme selection buttons 

with LEDs

For selecting and starting automatic 

programmes. 

X

 “Automatic programmes” 

see page 19 

All LEDs light up after switching on. The 

selected programme will start after pressing 

the button and the appliance will run 

automatically. 

Blender jug

For processing up to 2 litres of food. The 

blender jug is made of Tritan. Tritan is an 

unbreakable plastic with no discernable 

taste or smell. 

Caution!

Do not expose the blender jug to 

temperatures above 80°C. 

Lid with locking cap

To securely close the blender jug 

during processing. To add chopped or 

liquid ingredients, turn the locking cap 

anticlockwise and remove.