Faber CUBIA CLOSS ISOLA EV8 WH A60 ACTIVE - Инструкция по эксплуатации - Страница 15

EN 

1

15 

Activated Charcoal Filter (Recirculation Version) 

It cannot be washed or regenerated, and must be changed when the 

FC

 symbol on the display 

appears, or at least once every 4 months. The Alarm signal, if it has been activated, only 
appears when the Suction motor is turned on.

Activating the alarm signal  

• In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on 

installation or at a later date. 

•  Turn the Lights and the Suction Motor off. 
• Press 

D 

and

hold for 

approximately 5 Seconds

: 

• The message 

FC+Dot 

 flashes twice, A.C. Filter saturation alarm 

ACTIVATED

• The message 

FC+Dot

 flashes once, A.C. Filter saturation alarm 

DEACTIVATED

CHANGING THE ACTIVATED CHARCOAL FILTER

Resetting the alarm signal

•  Turn the Lights and the Suction motor off, then disable the 24h 

function, if enabled. 

• Press button 

E

 (see the paragraph on Use). 

Changing the Filter

•  Open the Comfort panels by pulling on the recess. 
•  Remove the Metal grease filters. 
•  Remove the saturated charcoal filter by releasing the fixing 

hooks. 

•  Fit the new filter and fasten it in its correct position. 
•  Replace the Metal grease filters. 
•  Close the Comfort panels.