Sony DCR-TRV240E / DCR-TRV241E - Инструкция по эксплуатации - Страница 145

145

Customizing Your Camcorder       

Выполнение индивидуальных установок на Вашей видеокамере

Changing the menu settings

Note on PRINT SET*

9PIC PRINT and DATE/TIME are displayed only when an external printer (optional) is connected to
the intelligent accessory shoe.

Notes on the LP mode

• When you record a tape in the LP mode on your camcorder, we recommend playing back the tape on

your camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in
pictures or sound.

•When you record in the LP mode, we recommend using a Sony cassette so that you can get the most

out of your camcorder.

• When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the

playback picture may be distorted or the time code may not be written properly between scenes.

Note on AUDIO MODE

When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX.

* DCR-TRV340E/TRV341E/TRV740E only

**To dub a tape to another VCR

You cannot select AUDIO MODE for tapes recorded in the Digital8   system. You, however, can select
AUDIO MODE when you dub tapes recorded in the Hi8/standard 8 system to another VCR using the
i.LINK cable.

(continued on the following page)

Icon/item

*

 9PIC PRINT

DATE/TIME

REC MODE

AUDIO MODE

q

 REMAIN

Mode

z

RETURN

SAME

MULTI

MARKED

z

OFF

DATE

DAY&TIME

z

SP

LP

z

12BIT

16BIT

z

AUTO

ON

Meaning

To cancel prints of split screens

To make prints of the same split screen (p. 232)

To make prints of different split screens

To make prints of images with print marks in
recording order

To make prints without the re cording date and time

To make prints with the recording date

To make prints with the recording date and time
(p. 232)

To record in the SP (Standard Play) mode

To increase the recording time to 1.5 times the SP
mode

To record in the 12-bit mode (two stereo sounds)

To record in the 16-bit mode (one stereo sound with
high quality)

To display the remaining tape bar:

• For about eight seconds after your camcorder is

turned on and calculates the remaining amount of
tape

• For about eight seconds after a cassette is inserted

and your camcorder calculates the remaining
amount of tape

• For about eight seconds after 

N

 is pressed in VCR

mode

• For about eight seconds after DISPLAY is pressed

to display the screen indicators

• For the period of tape rewinding, forwarding or

picture search in VCR mode

To always display the remaining tape bar

   POWER
   switch

MEMORY

MEMORY

CAMERA
VCR

CAMERA
VCR**

CAMERA
VCR