Beurer BF 530 - Инструкция по эксплуатации - Страница 14

14

5. Unit description  

Overview

1. Electrodes

2. Down button 

3. Set button 

SET

4. Up button 

5. Display

6. Initial use  

Inserting the batteries

If there is one, remove the plastic insulating strip by pulling it from the battery compartment lid and remove 

the protective film from the batteries, then insert them the correct way round. If the scale does not func-

tion, remove the batteries completely and reinsert them.

Changing the weight unit

When supplied to the customer, the scale is set to weigh in “kg”. Switch on the scale by briefly applying 

pressure to the standing surface with your foot (approx. 1-2 seconds). Wait until “  kg” appears in the 

display. To the rear of the scale, there is a button where you can select “pound” and “stones” (lb, st).

Positioning the scale

Place the scale on an even, hard surface (no carpet); a hard surface is crucial to accurate measurements.

7. Entering user data  

To calculate your body fat percentage and additional body values, you must save the personal user data.

The scale has 8 user memory spaces which allow you and members of your family to save and access 

personal settings, for example.

•  Place the scale on an even, hard surface (no carpet); a hard surface is crucial to accurate meas-

urements.

•  Switch on the scale by briefly applying pressure to the standing surface with your foot (approx. 1-2 sec-

onds). Wait until “  kg” appears in the display.

•  Start the setting by pressing the 

SET

 button. The first memory space flashes in the display.

•  Press the  /  button to select the desired memory space and confirm by pressing the 

SET

 button.

•  You can now make the following settings:

User data

Set values

Users/persons

P-1 to P-8

Height

100 to 220 cm (3' 3.5" to 7' 2.5")

Age

10 to 100 years

Gender

Male (   ), female (   )

Activity level

1 to 5

1

2 3

4

5