Велокомпьютеры VDO Z3 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
40
EN
No pulse display (dash in the
display)
The receive channel for pulse is
switched off (a 15-minute period
has elapsed without receiving
pulse data)
Press buttons
¥
+
ç at the
same time
No average pulse
Timer has not been started
Start timer
No maximum pulse
Timer has not been started
Start timer
No pulse percentage of the
personal maximum pulse
Personal data has not been set,
timer has not been started
No data relative to training times
is in the set training ranges
Timer has not been started.
Start timer
Calorie display does not function
Personal data has not been set,
timer has not been started
Watt display does not function
- Personal data has not been set
- Watt settings have not been
made
- Cadence transmitter is not
installed
- Cadence transmitter does not
function
LAP data cannot be displayed/
are no longer present
The LAP data have been deleted
prior to LAP RECALL
Screwdriver is
fl
ashing on the
display
Service interval for your bicycle
is displayed. Take your bicycle
in for service or perform the
service yourself
Walking shoe is shown in the
display (bicycle distance data is
no longer displayed) £
Walk mode is switched on.
In walk mode certain bike
functions are not available
The timer indicator is
fl
ashing
A timer is still running.
Bell icon is displayed
An alarm is set (alarm time)
The LAP icon is
fl
ashing
A LAP recording is still running.
End recording with the
∫
button
