VDO Z3 - Инструкция по эксплуатации - Страница 47

38

EN

15. SLEEP MODE

Your VDO computer has a two-stage sleep mode. 
Sleep mode is activated automatically if the computer no longer 
receives data.

Phase 1 after 5 minutes:   - The display goes into sleep mode

Now the display shows temperature, time, date, and day of the week. 
.After an additional 10 minutes the second phase of sleep mode will be 
activated, will be activated, the receiver will be switched off.
FOR WAKE UP 

press any button.

Description special case 1.
No speed signals (e.g. when taking a break
No cadence signals (e.g. when taking a break) 
Pulse signals will continue to be received (e.g. computer on wrist)
In this case the receive channels for speed and cadence are opened for 
a total of 3 hours. Energy is consumed in this process.
To extend the service life of the batteries, leave your VDO computer in 
the handlebar holder and move out of the receive range, or take off the 
pulse transmitter belt.

16. TROUBLESHOOTING

Here is a list of possible errors, their causes, and what you can to 
correct the error:

Problem when pairing the speed 
transmitter/cadence transmitter

- 

 Check the magnet position 
(distance between magnet 
and transmitter, position of the 
magnet to the transmitter point 
on the transmitter)

-  Check the battery in the 

transmitter

-  Check the battery in the 

computer (if battery voltage is 
insuf

fi

cient then the receiver 

cannot receive the signals)

Problem when pairing the speed 
transmitter/cadence transmitter

-  Check the magnet position 

(distance between magnet 
and transmitter, position of the 
magnet to the transmitter point 
on the transmitter)

-  Check the battery in the 

transmitter

-  Check the battery in the 

computer (if battery voltage is 
insuf

fi

cient then the receiver 

cannot receive the signals)