Kuppersberg ICO 402 - Инструкция по эксплуатации - Страница 64

6

4

TECHNICAL pASSpoRT

ENGLISH

Electric Hob

Note:

 By continuous touch the timer control button, the slider works at below 

consequence: “Single Digit-Tens Digit-Confirm Setting -Single Digit-…”

Note:

 After adjusting, the setting in timer indicator will flash for 5 seconds and 

then stop flashing, then the setting be confirmed.

Note: 

The default setting of timer is 30 minutes.

4. When the timer is set, it will begin to count down

immediately, the display will show the remaining time.

NOTE: 

The red dot next to power level indicator will 

illuminate for those zones be set with timer. You can check 
timer setting of different cooking zone which set with timer, by 
press corresponding cooking zone select button.

NOTE: 

If more than one heating zone has timer setting, the 

timer indicator will show the lowest time. The red dot next to 

power level indicator will flash.

5. When cooking timer expires, the corresponding cooking

zone will be switch off automatically.

Note: 

The minute reminder and timer can be use at same time, the timer indicator 

will show the lowest time setting. If the lowest setting is minute reminder, the red 

dot next to timer indicator will flash. If the lowest setting is timer setting, the red 
dot of corresponding cooking zone power level indicator will flash.

Note: 

If indicator shows timer setting of cooking zone. To check minute reminder 

setting, press the timer control button  

, the indicator will show minute 

reminder setting.

D E T E CT I O N  O F  PA N  A N D  S M A L L  A RT I C L E S

For induction hob, if the display flashes“ 

 ”alternately  with  heat 

setting.

Â

you have not placed a pan on the correct cooking zone or, 

Â

the pan you’re using is not suitable for induction cooking or,

Â

the pan is too small or not properly centered on the cooking zone.