Kuppersberg ICO 402 - Инструкция по эксплуатации - Страница 57

5

7

ENGLISH

TECHNICAL pASSpoRT

Electric Hob

Notes: 

1. After connect to electricity, when power on, the buzzer of hob beeps once, all

indicators light up for 1 second then go out.

2. When the hob in Standby mode, if there is no practice within 1 minute, the

electric hob will auto turn off, with buzzer beeps once. 

3.  To  turn  on  hob,  press  the  ON/OFF  control  button  and  hold  on  for  about  3

seconds; To turn it off, just need to press ON/OFF button again.

4. You can modify the heat setting at any time during cooking. 
5. The default setting of power level is 5, and power level can be adjusted from 0

to 9. The heating element will turn off under power level 0, with indicator shows “-”

6.  The  heat  setting  indicator  of  the  selected  zone  will  flash  when  adjusting.  

After adjusting, the number in indicator will flash for 5 seconds and then stop flash, 
then the setting be confirmed.

To turn off hob

1. Touch heating zone selection control button, then turn

the cooking zone off by adjust heat setting to 0 level,

which indicator shows“-“.

2. You can also turn the whole hob off by touching the

ON/OFF

 control button.

Note: 

The Timer/Minute Reminder setting will be canceled if hob be turn off.

Note:

 If there is power cut off during cooking, all programmer setting will be 

cancelled, you need to reset the programmer again.

Note: 

The cooling fan of induction hob will remain on for about 1 minute after 

the hob be turned off.

Beware of hot surfaces

After turn off, the letter ”H” 

 will show in the power setting indicator which 

cooking zone is hot to touch. It will disappear when the surface has cooled down to