Варочная панель Kuppersberg ICO 402 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
TECHNICAL pASSpoRT
ENGLISH
Electric Hob
Fix hob to cabinet:
Insert the hob into the cabinet/work surface as below
diagrams, the mounted clips on the sides can secure your hob sturdily.
Assemble the Feet – Only in model ECO 302 and ICO 302
Your hob has 4pc feet, be packed as accessories, please assemble the feet to the
hob by yourselves if need it. Find the 4pcs feet fi rst, then screw up the feet into the
4 holes reserve in 4 corners of metal base.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker.
The appliance have a large power rating and must
be connected to electricity by a Qualifi ed Electrician.
N OT E S:
1.
If the cable is damaged or needs replacing, this should be done by an after-sales
technician using the proper tools, so as to avoid any accidents.
2.
If the appliance is being connected directly to the mains supply, an omni polar
circuit breaker must be installed with a minimum gap of 3mm between the contacts.
3.
The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
4.
The cable must not be bent or compressed.
5.
The cable must be checked regularly and only replaced by qualifi ed technician.
4
5
