Варочная панель Kuppersberg ICO 402 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
46
ENGLISH
TECHNICAL pASSpoRT
Electric Hob
The method of connections shown below.
Cautions
1.
The hob must be installed by qualified personnel or technicians.
Please never
conduct the operation by yourself.
2. The electric hob shall not be mounted to cooling equipment, dishwashers and
rotary dryers.
3. The electric hob shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be heat resistant.
6. A steam cleaner is not to be used.
7. This electric hob can be connected only to a supply with system impedance no
more than 0.427 ohm. In case necessary, please consult your supply authority for
system impedance information.
Connecting the hob to electricity
– Only in model ECO 302 and ICO 302
Â
This hob is assembled with a 16A VDE plug power code, you can find the
nearest standard 230V socket, plug in and start cooking.
Â
If the cable is damaged or needs replacing, this should be done by an after-
sales technician using the proper tools, so as to avoid any accidents.
Â
The cable must be checked regularly and only replaced by qualified technician.
