Kuppersberg ICO 402 - Инструкция по эксплуатации - Страница 59

5

9

ENGLISH

TECHNICAL pASSpoRT

Electric Hob

To use booster function when induction hob is working, 

follows below:

1. Touch the heating zone selection control button to

select the cooking zone you want to use boost function.

2. Touch the Booster function control button

,  the  heating  zone  indicator  will  show “b”  and  flashing  for 

5  seconds  then  stop  flashing.  Then  Booster  function  be 

actived, the power reach Max for 5 minutes, and then return 

to the pre-set heat setting.

Note: 

1. When using booster function, if the other cooking zone in vertical direction

also working meanwhile power setting higher than level 2, programmer will auto 

turn power setting of the other cooking zone to level 2.

2. After booster finish, the cooking zone will return to original setting.

Cancel the Booster function

1. Touching the heating zone selection control that you

wish to cancel the booster function

2. Touching the «Booster» control

 to cancel the 

Booster function, then the cooking zone will revert to its 

original setting.

-You can also cancel Booster function by turn off the

cooking zone.

F L E x I B L E  A R E A S-I N D U CT I O N  H O B

Some of models might have one or several Flexible cooking areas. These 

Flexible cooking areas can each be used as a single zone or as two independent 
zones, accordingly to the cooking needs anytime.

Flexible areas are each made of two independent inductors that can be 

controlled separately. When working as a single zone, a cookware is moved from 

one zone to the other one within the flexible area keeping the same power level of 

the zone where the cookware originally was placed, and the part that is not covered 
by cookware is automatically switched off.