Kuppersberg FV3XE - Инструкция по эксплуатации - Страница 6

6

Technical passporT

english

Mixed and gas fuelled built-in hot plates

use, never touch them with the hands or 

other objects in order to prevent bums.

Immediately disconnect the 

appliance from the electricity main as 

soon as cracks are noted on the surfaces 

of the plates.

If the built-in hot plate has a lid, 

any spilt food should be immediately 

removed from this before it is opened. If 

the appliance has a glass lid, this could 

shatter when the cooker becomes hot. 

Always switch off all the plates before 

closing the lid.

IMPORTANT:

Always disconnect the appliance 

from the gas and electricity mains 

before carrying out any cleaning 

operation.

C L E A N I N G

3) HOT PLATE

Periodically wash the hot plate, 

the enamelled stell pan support, the 
enamelled burner caps “C» and the 
burner  heads  “M”  (see  fi g.  6)  with 
lukewarm soapy water. Following this, 
all parts should be thoroughly rinsed 
and dried. Never wash them while they 
are still warm and never use abrasive 
powders. Do not allow vinegar, coffee, 

milk, salted water, lemon or tomato 
juice from remaining in contact with 
the enamelled surfaces for long periods 
of time.

WARNINGS:

Comply with the following 

instructions, before remounting the 

parts:

B

Check that burner head slots 

have not become clogged by foreign 
bodies.

B

Check that enamelled burner 

cap “C” (fi g. 6) have correctly positioned 
on the burner head. It must be steady.

B

The exact position of the pan 

support is established by the rounded 
corners, which should be set towards 
the side edge of the hot plate.

B

Do not force the taps if they 

are  diffi cult  open  or  close.  Contact  the 
technical assistance service for repairs.

B

Correctly preserve the plate 

after use by treating it with special 
products, easily available on the market. 
This will keep the surface of the plate 
clean and bright. The operation will 
also prevent the formation of rust.