Kuppersberg FV3XE - Инструкция по эксплуатации - Страница 10

10

Technical passporT

english

Mixed and gas fuelled built-in hot plates

8) GAS CONNECTION

Before connecting the appliance, 

check that the values on the data label 
affixed to the underside of the hot plate 
correspond to those of the gas and 
electricity mains in the home.

A label on the appliance indicates the 

regulating conditions: type of gas and 
«working pressure. Gas connection must 
comply with the pertinent standards 
and provisions in force. When gas is 
supplied through ducts,the appliance 
must be connected to the gai> supply 
system:

B

with a rigid steel pipe. The 

joints of this pipe must consist of 
threaded  fittings  conforming  to  the 
standards. Use of seals such as heinp 
with  suitable  cement,  or Teflon  tape,  is 
permitted; 

B

with copper pipe. The joints 

of this pipe must consist of unions with 
mechanical seals; 

B

with 

seamless 

flexible 

stainless steel pipe. The length of this 
pipe must be 2 meters at most and the 
seals must comply with the standards.

When the gas is supplied by a 

bottle

 the appliance must be fuelled 

by a pressure (governor conforming 
to the provisions in force and must be 
connected:

B

with a copper pipe. The joints 

of this pipe must consist of unions with 
mechanical seals; 

B

with  seamless  flexible  stainless 

steel pipe. The length of this pipe 

must 

be 2 meters at most and the seals 

must comply with the standards. it is 
advisable to apply the special adapter 
to  the  flexible  pipe.  This  is  easily 
available from the shops and facilitates 
connection with tlhe hose nipple of the 
pressure governor on the bottle. 

B

with rubber hose pipe 

in compliance with standards. The 
diameter of this hose pipe must be mm 
and its length must be no less than 
400 mm and no more than 1500 mm. 
It  must  be  firmly  fixed  to  the 

hose 

nipple by means of the safety 
clamp specified by standards.

9) ELECTRICAL CONNECTION

The electrical connections of the 

appliance must be carried out in 
compliance with the provisions and 
standards in force.

Before connecting the appliance, 

check that:

B

The electrical capacity of 

the mains supply and current sockets 
suit the maximum power rating of 
the appliance (consult the data label 
applied to the underside of the hot 
plate).

B

The socket or system has an 

efficient earth connection in compliance 
with the provisions and standards in 
force. The manufacturer declines all 
responsibility for failing to comply with 
these provisions.