Philips GC9140/02 - Инструкция по эксплуатации - Страница 7

12

  Filling opening

13

  Supply hose storage compar tment

14

  Cord rewind button

15

  Storage compar tment for mains cord

16

  Mains cord

17

  Calc Clean tank emptying button

18

  Calc Clean tank with light

19

  Steam generator

20

  Supply hose storage bracket

21

  Supply hose storage groove

22

  Carr y lock slide

23

  Carr y lock

24

  On/off knob

25

  Steam selection buttons with lights (high, medium and ECO steam settings)

26

  ’Water tank empty’ light

27

  Automatic shut-off light

28

  Auto Calc Clean light

using the appliance

three steps for ergonomic ironing

1 

Ergonomic board height (Fig. 2)

Set the ironing board to the correct height. When you stand, the distance between your elbow and 

the ironing board has to be approximately 27cm. You can use the heat-resistant iron resting mat as a 

guide.

2 

Ergonomic iron design (Fig. 3)

The upward sloping handle ensures a comfor table position of the wrist.

3 

Ergonomic iron resting mat (Fig. 4)

The iron resting mat allows you to place your iron horizontally on the ironing board.

ironing

  1 

 Place the steam generator on a stable and level surface, i.e. on the hard part of the ironing 

board or on a table. 

  2 

 Remove the water tank from the appliance (Fig. 5).

  3 

 Fill the water tank to the maximum level.  (Fig. 6)

Note: The ‘water tank empty’ light flashes if the water tank is empty. 

Do not put hot water, perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in 

the water tank.

Note: Empty the Calc Clean tank if there is water in it. See chapter ‘Auto Calc Clean function’.

  4 

 Slide the carry lock slide to the left to unlock the iron and take the iron off the steam 

generator (Fig. 7).

  5 

 Take the heat-resistant iron resting mat off the steam generator.  (Fig. 8)

  6 

 Place the heat-resistant iron resting mat on the ironing board and put the iron on it (Fig. 9).

Note: You can safely put the hot iron on the mat during ironing

  7 

 To iron with steam, set the temperature dial to 

2

 or higher.  (Fig. 10)

  8 

 Put the plug in an earthed wall socket (Fig. 11).

 - Set the on/off knob to ‘on’.  (Fig. 12)

EnGlish

7