Philips GC4810/02 - Инструкция по эксплуатации - Страница 13

 2 

 Press the spray button several times to moisten the article to be 

ironed.

shot of steam

A powerful shot of steam helps remove stubborn creases.

 1 

 Make sure that there is water in the water tank.

 2 

 Press and hold the shot-of-steam button for a few seconds. Then 

release the button.

Note: The shot-of-steam function can only be used at temperature settings 

between 

3

 and MAX. 

Vertical shot of steam

 - You can also use the shot-of-steam function when you hold the iron 

in ver tical position. This is useful for removing creases from hanging 

clothes, cur tains etc.

Never direct the steam at people.

turbo steam

The turbo-steam function helps remove difficult creases.

 1 

 Make sure that there is water in the water tank.

 2 

 Press and hold the turbo-steam button for a few seconds. Then 

release the button.

Note: The turbo-steam function can only be used at the MAX temperature 

setting.
Note: Do not keep the button pressed for more than 10 seconds. Wait at 

least one minute before you use the turbo-steam function again to let the iron 

reheat. The iron is hot enough when the temperature light goes out.

Drip stop

This iron is equipped with a drip-stop function to prevent water from 

dripping out of the soleplate: the iron automatically stops producing steam 

when the temperature is too low. When this happens, you may hear a 

sound. 

EnGlish

13